Supermicro X9/X10/X11 Fan Speed Control - ServeTheHome Forums
网页2011年1月26日 — Reference material regarding fan speed control on SuperMicro X9/X10/X11 motherboards. This has been pieced together over some time and I finally got that "aha!" moment yesterday where it all came together. A bit of testing confirmed that this is effectively correct (even if SM might disagree on some fine details).
Reference Material Supermicro X9/X10/X11 Fan Speed Control
网页2016年5月30日 — Reference material regarding fan speed control on SuperMicro X9/X10/X11 motherboards. This has been pieced together over some time and I finally got that "aha!" moment yesterday where it all came together. A bit of testing confirmed that this is effectively correct (even if SM might disagree on some fine details).
Reference Material Supermicro IPMI Default Login and Password
网页2016年1月5日 — Resources. Reference Materials. Default Password Reference. When logging into a Supermicro IPMI interface, one is prompted for a login (username) and password. On modern Supermicro IPMI interfaces the default login/ password is: Login: ADMIN. Password: ADMIN.
Supermicro POST code B7 and B9 - ServeTheHome Forums
网页2010年12月21日 — 113. Sep 5, 2016. #1. Supermicro POST code B7 and B9 indicate a memory issue. I have a Supermicro E5 V1 system that has been running for some time. During a recent reboot, it got stuck on B7 and B9 POST codes. I saw ECC errors in …
Supermicro H12SSL-i & Noctua - ServeTheHome Forums
网页2023年8月11日 — The bmc in supermicro boards runs the fans @ 30% in the "optimal" fan settings. 30% of 1700rpm = 510 rpm > +-20% thats 408 to 612 rpm. 408 rpm is still lower than what you have set as low ct and will trigger an alarm. Thank you for your explanation. But, now, I've set the FANs to "full speed" and I still have the warning.
Supermicro x12SPL-F won't boot with a GPU in slot 6 - a weird …
网页2023年10月30日 — Nov 25, 2023. #1. I am setting up an ESXi host where I've been passing through a Tesla P4 to a VM. This worked great on my old hardware (x10) but has issues with the new x12 board with a 4310 and 128G of supermicro ram. When installing (any, I've tried a few) GPU, I can get it to boot to VMware on the first boot; after a restart, it hangs on ...
Supermicro IPMI Fan Control on Windows - ServeTheHome Forums
网页2019年10月10日 — From the Supermicro IPMI interface, I could see this fan sometimes go to 0 RPM resulting in the triggered alert and the fans to run briefly at max speeds before reverting back to low speeds. The standard speed setup with the 0 low threshold results in a quiet workstation and is fine for now, but I would like more control over the raw speeds.
NVMe - make the most of your PCI-e Slots (How-to config …
网页2015年7月19日 — Supermicro said the card should work without tweaking any bifurcation settings (that would make sense for this card!) but the mode needs to be changed to EFI from the default Legacy and that is it. I can see that ESXi (and Linux) can detect the controller, lspci lists 3 entries related to the PLX chipset but the disk is not detected.
Supermicro Rail Failure? - ServeTheHome Forums
网页2019年6月27日 — So I have actually had a Supermicro rail fail catastrophically. It was an SC836 chassis fully loaded with drives with MCP-290-00053-0N "yellow label" rails from ebay. I extended the server to do some work and one of the rails had the inner rail and slider separate from the outer rail, dropping the server and spraying tiny ball bearings all over ...
SuperMicro X9SRL slot bifurcation - ServeTheHome Forums
网页2022年1月26日 — 539. 385. 63. Feb 19, 2024. #1. With version 3.3 of the BIOS, the X9SRL supports bifurcation. But, it's not just bifurcation...it's actually re-arrangement of the PCIe lanes. Every slot seems to have all PCIe lanes wired to it, even if the active slot width when the board was made (and bifurcation wasn't really a thought) was fewer lanes.